歐立科技 歐立科技

Open Navigation
Close Search Form

SG-101

1
*  Z-wave Plus technology
*  Heart of AirLive IoT kits
*  With 802.11n WiFi and built - in 6 tunes Siren
*  Support P2P technology in Z-wave Gateway
*  Support OTA firmware upgrade
*  Wall mountable with Slim Outlook
*  Expandable with more sensors or Smart Plug
*  Easy to manage by AirLive Simple Life APP
Specification
ModelSG-101
ProcessorMT7620A clock up to 580MHz
Memory (RAM)128 MB DDR2 RAM / 193 Mhz (maximum 256 MB)
Memory (Flash)16 MB serial flash on board
Z-Wave StandardZ-wave plus
Z-Wave FrequencyCE:868.40 MHz, 869.85 MHz
FCC:908.40 MHz, 916.00 MHz
Maximum transmission distance40 M
Maximum connected Z-Wave devices232
WiFiIEEE 802.11 b/g/n
WiFi Output Power11 dBi
Network (LAN)10/100 Base-T RJ45
SirenBuild-in 6 tune Siren
LED Indicator3 x LED indicators (Power/Ethernet/WiFi)
1 x white LED(front)
PowerDC 5 V 1 A adaptor
Dimension and Environment
Dimensions110(L) x 110(W) x 19(H) mm
Operating Temperature0 ~ 40° C
Operating Humidity85% RH max

 

Ordering Information

ModelSG-101
Standard Package
Package TypeWhite Box
Package Size11.5 * 6.5 * 12.7 cm
Package Weight0.313
Package ContentSG-101 * 1
DC 5 V / 1 A adaptor * 1
USB cable * 1
LAN cable * 1
Carton Package
Quantity40
Dimensions49 * 29 * 29
Weight13.5 kg
Firmware & Driver
NameDescriptionDownloadDate
Firmware version 1.82
2018/04/25
AirLive Innovations: Smart Life IoT
AirLive IoT PnP installation guide
AirLive Smart Life IOT Catalog 2018 (EN)
What do the green LEDs on the side of the Gateway mean?
Please refer to attached file.

Download
How to reset or remove the configuration from the gateway?
Please refer to attached file.

Download
The siren is not displayed in the APP.
Please refer to attached file.

Download
I do not see the sensors or actuators in the APP.
Please make sure the sensors and/or actuators are included to the Gateway.
By default all SK-101/102/103/104 packages will already have the sensors and/or actuators included to the Gateway.
When a factory reset was done or all sensors/actuators were cleared from the APP.
Or you want to add an extra sensor/ actuator, then please follow the below QIG guide for the including settings.
How to add my SmartCube 300W to the Gateway and APP?
Please refer to attached file.

Download
How to add my Gateway to the APP via QR code? (Old APP)
Please refer to attached file.

Download
How to operate the Airlive Smart Life APP?
Please refer to attached file.

Download
How to reset IOT password and configurations?
Please refer to attached file.

Download
TOP