The Airlive SmartLife Plus has a clean and modern look, which is easy to use and working on both Android and iOS.
Smart Security full alarm
Security, Turn your IoT system into a Alarm system with just one push of a button in the App. When "Home Securtiy Alarm" is enabled every connected PIR, Door/window ect sensor will be active regardless of any other Macro setting. When one of the sensors is triggered the main alarm will sound. And a notification will be send.
Smart Security single setup
Security, setting up macro is very easy, in just 3 simple this can setup in the App. Every Home is different, with many doors and windows. With the Airlive Sensors you can secure each door and window in a different way. Place a Door/Window sensor on a door or window. And setup your desired Alarm setting. This can be a simple warning when someone opens a door or a full Alarm. The time period and time of the Alarm can also be set with the Schedule function.
Lighting;Airlive IoT devices are great for lighting control, Illuminate your home one bulb at the time or all at ones, Make different lighting scenes and use the Airlive SmartLife Plus APP to control all. AirLive SP-101 Smartplug is a very easy to use device to turn on and off a electric device like a floor lamp. Power usage is also shown. Just plug it into the wall socket and the lamp into plug and you are ready to go.
Lighting Control with Dimmer
Sometimes only turning on/off a light is not enough, Too change the brightness of the a light a dimmer is needed. The Dimmer Socket is the most easy device to use. Turn a excising light into a dimmable light just put in the dimmer socket into the E27 socket and a dimmable light bulb (E14) in the socket and done. The Airlive SmartLife Plus app makes it easy to control the Dimmer Socket, Just slide the bar to the desired brightness level and the light bulb will light up. Make a easy to setup Scene with a fixed brightness level and with one push the light will go to the preset level.
Home Automation, can be Security, Lighting Control and so much more. With the Airlive SmartLife Plus App. Control a single device or multiple, make scenes and Macro’s to combine the different device. All can be done with the Easy Setup of the Airlive IoT devices and App. Home Automation, is about automating setups and let device run without the need to push a button, For example automatically close the curtains when the sun goes down, or turn the AC on when the room temperature become to high. Turn your lights on by just saying a simple command.
Home Automation Macro Setup
Airlive IoT devices can be use together, like the PIR sensor and Smartplug/Inwall Switch. Turn your light on when you arrive home on weekdays and turn the light off again automatically. All by setting up one Macro and installing two Airlive Z-Wave devices.
Macro: PIR Entrance On Weekdays only from 18:30 to 1930.
PIR Detect Motion Entrance Light On. Light off after 10mins
Airlive IoT can do more also with other devices like a Air Conditioner. When it become to Hot in a room Airlive IoT can turn the AC on and cool down the Room even when you are not at home.
Macro: High Temp and AC Set Temperature Sensor trigger value >27°c for 5 Min Turn AC on. AC Temp set to 23°c.
Airlive IoT can also warn you, by sending a notification.When the 3-1 sensor is placed on a window, which is then opened a notification can be send to warn. Someone opened a window.
Macro: Window When window is opened send notification
Home Automation Voice Control
Airlive IoT: Scenes are a important part of the IoT setup, Scenes make it more easy to Control one or multiple IoT Devices at ones. Either by App or Voice.This can be a simple scene of turning the Light on and off. To multiple lights and curtains at the same time.
Scene: Light On When pushing the Light on Button the Light will turn on
Scene: Light On For Voice Control only say the name of the scene “Light On”
Home Automation Voice Control and Scenes
Airlive IoT: Scenes are a important part of the IoT setup, Scenes make it more easy to Control one or multiple IoT Devices at ones. Either by App or Voice.Another way to use scene could be to turn on a party mode, for example turn the ceiling light off, and turn all other lights on.
Scene: Party When pushing the Party Several lights will turn on/
Scene: Party For Voice Control only say the name of the scene “Party”
* Airlive SmartLife Plus App for iOS and Android * Control the Airlive SG-101 and Z-wave Devices * Make Scenes * Make IFTTT Macros * Schedule setup * Receive Notifications * Event and Chart view * Support up to 4 cameras per Gateway * Control multiple gateway's with one App * Easy and Friendly user Interface
Please make sure the sensors and/or actuators are included to the Gateway. By default all SK-101/102/103/104 packages will already have the sensors and/or actuators included to the Gateway. When a factory reset was done or all sensors/actuators were cleared from the APP. Or you want to add an extra sensor/ actuator, then please follow the below QIG guide for the including settings.
How to add my SmartCube 300W to the Gateway and APP?